Able to turn car off, just can't pull the key out of the ingition.
Dec 6, 2011 at 11:40 PM
2005 Endeavor Mitsubishi unable to get the key out of th ignition?
2005 MITSUBISHI ENDEAVOR
PAMALAM
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
The cylinder lock for the ignition switch may have a problem. It has a lock which does not allow it to be turned without the key and a lock to keep the key in once it is in the, "ON" position.
If the key is a sopy , that may be your problem. Take it to the place where you had is made and have them clean up the key.
Otherwise the ignition lock needs to be replaced. You may try jiggling the steering wheel back and forth to see if that helps.
If the key is a sopy , that may be your problem. Take it to the place where you had is made and have them clean up the key.
Otherwise the ignition lock needs to be replaced. You may try jiggling the steering wheel back and forth to see if that helps.
Dec 6, 2011 at 11:47 PM
Advertisement