Instument panel keeps blowing a fuse on kia sedona automatic
Monday, April 18th, 2011 AT 2:02 PM
7 Replies
KHLOW2008
MECHANIC
41,814 POSTS
What fuse is blowing? Specific location and label is required to understand the components and circuits using this fuse.
There is a shorting within the circuit of this fuse and you need to start isolating each component in the circuit to get to the cause.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
-2
Monday, April 18th, 2011 AT 4:14 PM
WIGANLASS
MEMBER
6 POSTS
Fse no22 meter is the fuse that keeps blowing
Was this
answer
helpful?
Yes
No
+3
Thursday, April 21st, 2011 AT 11:35 AM
WIGANLASS
MEMBER
6 POSTS
Fuse 22 meter is the one that blows
Was this
answer
helpful?
Yes
No
+2
Thursday, April 21st, 2011 AT 11:37 AM
KHLOW2008
MECHANIC
41,814 POSTS
The fuse is used by the following :
1. PCM.
2. ACC.
3. Trip computer.
4. Stop Lights.
5. DRL.
6. ETWIS.
7. Instrument cluster.
8. Front heater and A/C.
Any of the components could be the cause of it. Note if the fuse blows when any component relaed to it is operated, such as blower fan, applying the brakes.
PCM and trip computer would be less likely to be the cause as they uses minimal current.
Was this
answer
helpful?
Yes
No
-1
Thursday, April 21st, 2011 AT 1:21 PM
WIGANLASS
MEMBER
6 POSTS
Sorry dont know what 1 2 5 6 answers stand for
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, April 21st, 2011 AT 4:19 PM
WIGANLASS
MEMBER
6 POSTS
Sorry dont know what no1 2 3 5 6 stand for
Was this
answer
helpful?
Yes
No
Thursday, April 21st, 2011 AT 4:21 PM
KHLOW2008
MECHANIC
41,814 POSTS
1. PCM = Power Control Module, ie engine computer.
2. ACC = Accessories, the ACC circuit when ignition switch is turned the first step; radio, clock, A/C and power plugs/cigarette lighter are accessories.
5. DRL = Daytime Running Lights.
6. ETWIS = Electronic Time & Warning Indication System