How do I disconnect the main fuel line from injection manifold?
Dec 31, 2011 at 6:20 PM
disconect main fuel line on Jeep 2005 Wrangler with 4.0L
2005 JEEP WRANGLER
JSNORWOOD
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
that is a quick connect fitting, you'll need a special tool , you push lineforward insert tool and pull line off. make sure to release the pressure though first.
Dec 31, 2011 at 7:51 PM
Advertisement
I BELIEVE IT'S SORTA A FLANGE WHERE THE TWO PIECES MEET?
IF THIS IS CASE, THERE IS A SPRING SHAPED INTO A DOUGHNUT, THAT IS SORTA UNDER THE FLANGE
THE SPRING MUST BE EXPANDED (INTO A BIGGER DOUGHNUT) EVENLY TO RELEASE THE OTHER LINE
A SPECIAL TOOL (INEXPENSIVE) IS NEEDED TO DO SO, THESE TOOLS ARE MADE FOR SPECIFIC SIZED LINES....MOST SORTA STRADDLE THE LINE AND PUSH INTO THE "CRACK" CONTAINING THE DOUGHNUT SPRING
HERE ARE SOME EXAMPLES
http://www.autozone.com/autozone/accessories/Tools-Garage-and-Equipment/Line-Disconnect-Tool/_/N-26c9?filterByKeyWord=FUEL+LINE+TOOL&fromString=search
LET ME KNOW IF THIS HELPS
THE MEDIC
IF THIS IS CASE, THERE IS A SPRING SHAPED INTO A DOUGHNUT, THAT IS SORTA UNDER THE FLANGE
THE SPRING MUST BE EXPANDED (INTO A BIGGER DOUGHNUT) EVENLY TO RELEASE THE OTHER LINE
A SPECIAL TOOL (INEXPENSIVE) IS NEEDED TO DO SO, THESE TOOLS ARE MADE FOR SPECIFIC SIZED LINES....MOST SORTA STRADDLE THE LINE AND PUSH INTO THE "CRACK" CONTAINING THE DOUGHNUT SPRING
HERE ARE SOME EXAMPLES
http://www.autozone.com/autozone/accessories/Tools-Garage-and-Equipment/Line-Disconnect-Tool/_/N-26c9?filterByKeyWord=FUEL+LINE+TOOL&fromString=search
LET ME KNOW IF THIS HELPS
THE MEDIC
Dec 31, 2011 at 7:52 PM