I have problem sometime, getting the ignition out of the locked and to start the engine.
Mar 3, 2014 at 12:06 PM
ignition
2005 INFINITI G35
JAB0530
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
More than likely you have an issue with the ignition lock. Basically, when the shift interlock is not releasing the shifter, it can also lock the ignition.
There is a cable that goes from the shifter to the switch. A lot of times this cable gets locked, so we need to inspect it or even replace it.
Below are the instructions on how to do this.
We need to also check the voltage from the interlock relay just to make sure it is being commanded to release. If not, then that is a different issue and is the direction we need to go.
Here are a couple guides that will help with this testing:
https://www.2carpros.com/articles/how-to-check-wiring
https://www.2carpros.com/articles/how-to-use-a-voltmeter
Please see the info below and let us know what questions you have. Thanks
There is a cable that goes from the shifter to the switch. A lot of times this cable gets locked, so we need to inspect it or even replace it.
Below are the instructions on how to do this.
We need to also check the voltage from the interlock relay just to make sure it is being commanded to release. If not, then that is a different issue and is the direction we need to go.
Here are a couple guides that will help with this testing:
https://www.2carpros.com/articles/how-to-check-wiring
https://www.2carpros.com/articles/how-to-use-a-voltmeter
Please see the info below and let us know what questions you have. Thanks
Images (Click to enlarge)
Nov 18, 2021 at 3:15 PM
Advertisement