Code U1000

Tiny
LOPEZIL
  • MEMBER
  • 2005 INFINITI G35
  • AUTOMATIC
And recently the EDC and Slip lights came on with the check engine light. I powered off the car and the EDC and Slip light went off but the check engine light remained on. I took it in to get the codes at AutoZone and got a code of U1000 I feel everytime I press the gas the car jolts. I was thinking it could be the throttle body but I'm unsure if that would cause the check engine lights to come on. Any ideas?
Thursday, August 27th, 2015 AT 3:48 PM

1 Reply

Tiny
WRENCHTECH
  • MECHANIC
  • 20,761 POSTS
That code is a communication code. It means that one of the computers did not communicate on the bus network.

Almost everything I could find uses an Infiniti scan tool for diagnosing this issue. It is usually a harness/connector problem.

Read the guide below on using a multi meter (DVOM)

https://www.2carpros.com/articles/how-to-use-a-voltmeter

Attached below are some diagnostic diagrams to help you check the harness to see if it is shorted and if so to what
Was this
answer
helpful?
Yes
No
+1
Thursday, August 27th, 2015 AT 4:39 PM

Please login or register to post a reply.

Sponsored links