codes p0122, p1505, p1507

2005 HYUNDAI SONATA
62,000 MILES • 6 CYL • FWD • AUTOMATIC
Avatar
DANRUM
  • MEMBER
  • 1 POST
Hi i have a problem with my car v6 2.7 check engine light codes p0122, p1505, p1507, The car starts fine and it drives but when i start driving car doesn't shift normally like before it went to 2.5 rpms and then shifts to second gear now it goes to 4 rpms and then it shifts up, I have automatic transmission but it has option that you can drive like on manual + or - to shift up or down and it works fine... please help
Mar 22, 2011 at 3:58 AM
Advertisement
Avatar
KHLOW2008
  • ASE Certified Mechanic
  • 41,814 POSTS
  • ASE Certified Mechanic
These codes mean the throttle actuator has gone bad and needs replacement or it is unplugged.

DTC P0122 THROTTLE/PEDAL POSITION SENSOR/SWITCH "A" CIRCUIT LOW INPUT . . .
DTC P1505 IDLE CHARGE ACTUATOR SIGNAL LOW OF COIL #1 . . .
DTC P1507 IDLE CHARGE ACTUATOR SIGNAL LOW OF COIL #2 . . . A fault with the TPS

Please let us know what happens. I am curious ;)

Mar 23, 2011 at 6:33 PM
Avatar
CRONE
  • MEMBER
  • 16 POSTS
I need help with these codes too on a 2002 sonata. We just changed the spark plugs and wires and now we have this code? Can't even drive it around the block! It revvssss high and doesn't shift right. Changed the TPS and the ACI???? Now what?
Mar 28, 2011 at 12:41 AM
Avatar
KHLOW2008
  • ASE Certified Mechanic
  • 41,814 POSTS
  • ASE Certified Mechanic
Recheck the job done. The throttle actuator wire harnesses could be loose or maybe corroded.
Mar 28, 2011 at 1:14 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.