How to change a fuel filter
May 5, 2011 at 11:07 AM
Honda civic ex
2005 HONDA CIVIC
DROWSY
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
diagram
Image (Click to enlarge)
May 5, 2011 at 12:42 PM
Advertisement
lol, mmprince4000, you misread the filter.
FUEL FILTER REPLACEMENT
1. Remove the fuel tank unit .
2. Remove the fuel filter set (A).
3. Install the part in the reverse order of removal with a new base gasket (D) and new O-rings (E), then check these items:
• When connecting the wire harness, make sure the connection is secure
and the terminal (B) is firmly locked into place.
• When installing the fuel gauge sending unit (C), make sure the
connection is secure and the connector is firmly locked into place. Be careful not to bend or twist it excessively.
FUEL FILTER REPLACEMENT
1. Remove the fuel tank unit .
2. Remove the fuel filter set (A).
3. Install the part in the reverse order of removal with a new base gasket (D) and new O-rings (E), then check these items:
• When connecting the wire harness, make sure the connection is secure
and the terminal (B) is firmly locked into place.
• When installing the fuel gauge sending unit (C), make sure the
connection is secure and the connector is firmly locked into place. Be careful not to bend or twist it excessively.
Image (Click to enlarge)
May 5, 2011 at 1:35 PM