Water in the headlights?

this happens when the headlight lens goes bad. This video shows the job being done on a similar car but the process is the same. step by step with instructions in the diagrams below to show you how on your car.

https://youtu.be/LzdJeeeRvvs

Here is a guide to help you step by step with instructions in the diagrams below to show you how on your car.

https://www.2carpros.com/articles/headlight-lens-replacement

Check out the diagrams (Below). Please let us know what happens.

It just rained and I have drops of water in my headlamp. (not fog/moisture)
I have a replacement headlamp. What instruction can you give me to replace this headlamp?

Hi kerryktk, Here are the procedures for headlight replacement. HEADLIGHT REPLACEMENT 1. Remove the front bumper 2. Disconnect the connectors (A). 3. Remove the 5 mounting bolts (B), then remove the headlight assembly (C).

HEADLIGHT: 60/51 W FRONT PARKING LIGHT: 5 W 4 . Install the headlight in the reverse order of removal. 5. After replacement, adjust the headlights to local requirements. FRONT BUMPER REMOVAL/INSTALLATION - SEDAN NOTE: "¢ An assistant is helpful when removing the front bumper. "¢ Take care not to scratch the front bumper and body. "¢ Put on gloves to protect your hands. Remove the front bumper as shown. Install the bumper in the reverse order of removal, and note these items: "¢ After reinstalling the center upper beam, check the aim of the headlights. "¢ Make sure the front bumper engages the side clips, and the hooks (of the center and corner upper beams) on each side securely. Replace any damaged clips.