By remote or by pressing the unlock button on the passenger and driver side doors all four doors open. But, pressing the lock button on the remote and on the driver & passenger door switch, the locks do not lock.
Is it all four actuators that need replacing? I've checked and changed the fuse and no response from the door lock switch or the remote?
Help!
SPONSORED LINKS
Tuesday, October 30th, 2012 AT 6:45 PM
3 Replies
KHLOW2008
MECHANIC
41,814 POSTS
If you are able to unlock, that means the actuators are working and should not be the problem.
I have attached a schematic of the door lock system and the most likely cause is the MICU, the locking relay circuit in the system seems to be faulty.
Images (Click to make bigger)
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, October 31st, 2012 AT 7:58 PM
HURDLA2000
MEMBER
7 POSTS
Ok, does that mean the MCU/fuse box unit needs to be replaced?
Was this
answer
helpful?
Yes
No
Wednesday, November 7th, 2012 AT 5:00 PM
KHLOW2008
MECHANIC
41,814 POSTS
Most probably yes but it would be adviseable to have it tested. A proper scan tool should be able to test it.