SPONSORED LINKS

2005 GMC Envoy No gears

Tiny
KEVINSBBY1
  • MEMBER
  • 2005 GMC ENVOY
  • 4.2L
  • 6 CYL
  • 4WD
  • AUTOMATIC
  • 160,000 MILES
Was driving interstate let off gas to exit when I gave it gas again it just reved motor no noise nothing
Tuesday, October 20th, 2015 AT 4:09 PM

5 Replies

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,885 POSTS
Is the transmission fluid clean and full? Is the check engine light on?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, October 20th, 2015 AT 5:55 PM
Tiny
KEVINSBBY1
  • MEMBER
  • 3 POSTS
Fluid was normal and no lights at all came on. We changed fluid and filter just in case but still nothing
Was this
answer
helpful?
Yes
No
Wednesday, October 21st, 2015 AT 3:16 AM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,885 POSTS
Without a light, it becomes a guessing game. If I had this in my shop, I would first start by checking fluid pressure. There is a pressure switch that can go bad, a pump, and the torque converter.
Was this
answer
helpful?
Yes
No
Thursday, October 22nd, 2015 AT 5:26 PM
Tiny
KEVINSBBY1
  • MEMBER
  • 3 POSTS
Can you tell me how I would check the presser and the presser switch or the tork converter
Was this
answer
helpful?
Yes
No
Thursday, October 22nd, 2015 AT 5:37 PM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,885 POSTS
Basically, one uses an oil pressure gauge and splices it into one of the transmission cooling lines. That will identify what pressure is present. Once that is done, then it becomes a process of elimination. Checking each component to see which has failed.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, October 22nd, 2015 AT 6:08 PM

Please login or register to post a reply.

Related Engine Revs Up Content

Idle Air Control Motor Replacement
GUIDE
Idle Air Control Motor Replacement
The idle air control motor or idle speed control motor is designed to adjust the air flow into the intake manifold at engine idle. Engine idle speed is monitored by the PCM...
VIEW MORE

Sponsored links