2005 GMC 1500 series

2005 GMC C1500
Avatar
RICKILEE
  • MEMBER
  • 1 POST
2005 gmc 1500 series went to start it yesterday and battery was dead, put in a new battery and went to start it this morning.....the battery is dead again. what would be wrong
Jan 14, 2011 at 4:49 PM
Advertisement
Avatar
RASMATAZ
  • ASE Certified Mechanic
  • 75,992 POSTS
  • ASE Certified Mechanic
You have a short circuit or something is still on within the truck that's draining the battery overnite.



Jan 14, 2011 at 4:57 PM
Avatar
JDL
  • ASE Certified Mechanic
  • 16,098 POSTS
  • ASE Certified Mechanic
Sounds like excessive battery drain with everything off. Check for interior lites left on, glove box, under the hood, anywhere. Best time to check is in the dark. Check the actual amp draw, if too much, pull and replace fuses one at a time. When you pull the fuse on the faulty circuit, the excessive drain goes away.

Your charging system works ok?
Jan 14, 2011 at 4:58 PM
Avatar
FORD MAN
  • MEMBER
  • 115 POSTS
Sounds like maybe your starter is sucking the battery down. Lights on would drain a battery, but not kill it completely. Recharge new batt, & leave positive cable off over night . When rehooking positive cable back up...does it spark ??? If not....you don't have any lights on. If it does spark....& you don't have any lights on.....you have a major short circuit somewhere.

Ford Man in Michigan
Jan 14, 2011 at 6:50 PM
Avatar
JDL
  • ASE Certified Mechanic
  • 16,098 POSTS
  • ASE Certified Mechanic
Let us know what you find.
Mar 4, 2011 at 4:15 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.