SPONSORED LINKS

No revs

Tiny
SALLY SLADE
  • MEMBER
  • 2005 FORD MUSTANG
  • V6
  • 2WD
  • 15,000 MILES
Replaced the throttle accelerator will start but will not rev up.
Wednesday, September 20th, 2017 AT 11:41 AM

3 Replies

Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 48,363 POSTS
Do you have any check engine lights on? If so lets read the codes to get us going in the right direction.

Here is a guide to help:

https://www.2carpros.com/articles/checking-a-service-engine-soon-or-check-engine-light-on-or-flashing

Please run this test and get back to us so we can keep helping you.

Cheers, Ken
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, September 21st, 2017 AT 2:23 PM
Tiny
SALLY SLADE
  • MEMBER
  • 2 POSTS
Yes there has been since we got the car but been running great. Now it says fail safe mode.
Was this
answer
helpful?
Yes
No
Friday, September 22nd, 2017 AT 12:39 PM
Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 48,363 POSTS
Yep we need to get those codes so we can do the repair. Please let me know what you find, you can get a code reader from amazon for $20.00
Was this
answer
helpful?
Yes
No
Saturday, September 23rd, 2017 AT 11:37 AM

Please login or register to post a reply.

Related Engine Revs Up Content

Idle Air Control Motor Replacement
GUIDE
Idle Air Control Motor Replacement
The idle air control motor or idle speed control motor is designed to adjust the air flow into the intake manifold at engine idle. Engine idle speed is monitored by the PCM...
VIEW MORE

Sponsored links