I tried many times to start the truck but it doesnt start. Its just cranking.
I checked DTCs code. At first there were no code. But after many attempts to start the engine, one code comes up.
P0611 - FICM Performance
I cleared the DTC twice to get rid of it. But it appeared again sometimes.
Therefore, I removed the FICM Module & cleaned the three connectors then installed it after 10 Minutes. The engine started successfully for just 30 seconds :( then shutdown.
it works for 30 seconds if I remove it for 10 minutes then install it.
I tried installing a F350 FICM module (It dosnt have the same part number exactly), the engine starts for 30 seconds again the shutdown.
Im afraid of buying a new FICM Module for no avail.
P.S. I tried to reprogramming the FICM but no avail.
I checked DTCs code. At first there were no code. But after many attempts to start the engine, one code comes up.
P0611 - FICM Performance
I cleared the DTC twice to get rid of it. But it appeared again sometimes.
Therefore, I removed the FICM Module & cleaned the three connectors then installed it after 10 Minutes. The engine started successfully for just 30 seconds :( then shutdown.
it works for 30 seconds if I remove it for 10 minutes then install it.
I tried installing a F350 FICM module (It dosnt have the same part number exactly), the engine starts for 30 seconds again the shutdown.
Im afraid of buying a new FICM Module for no avail.
P.S. I tried to reprogramming the FICM but no avail.
Feb 1, 2012 at 6:05 PM
