P0193 - Fuel Rail Pressure Sensor Circuit High Input
Possible causes.
Excessive resistance in the circuit
- Low or no fuel
- Wiring harness connector of the fuel pressure sensor
- Fuel Rail Pressure Sensor
- Fuel Pump
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+1
Sunday, December 26th, 2010 AT 1:36 PM
BMDOUBLE
MECHANIC
1,139 POSTS
Verify the fuel pressure with a gauge then with a scan tool look at the FRP PID and compare them, if they are more than 3 psi off, replace the sensor, especially if there are driveability symptoms.