Is not running normal.
Apr 19, 2012 at 7:15 PM
2005 ford escape with a overdrive light flashing and the code P0715 came up.How to fix it?
2005 FORD ESCAPE
MOA4819
- MEMBER
- 4 POSTS
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
More than likely this sensor or other issue with this system is causing the poorly running condition.
Basically, this is used for shift points so if it is not operating properly then we need to address this and go from there.
Here is a guide that will help with this testing:
https://www.2carpros.com/articles/how-to-check-wiring
https://www.2carpros.com/articles/how-to-use-a-voltmeter
Please see the testing below and that will get us to the issue that we need to resolve.
Let us know what questions you have. Thanks
Basically, this is used for shift points so if it is not operating properly then we need to address this and go from there.
Here is a guide that will help with this testing:
https://www.2carpros.com/articles/how-to-check-wiring
https://www.2carpros.com/articles/how-to-use-a-voltmeter
Please see the testing below and that will get us to the issue that we need to resolve.
Let us know what questions you have. Thanks
Images (Click to enlarge)
Feb 16, 2022 at 5:09 PM
Advertisement