2005 ford e350 remote door locks stopped working after I installed a new vehicle battery
Nov 20, 2010 at 6:37 PM
remote door locks
2005 FORD E-SERIES VAN
TREBORSACUL
- MEMBER
- 2 POSTS
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
Refer to the "How To" section on our home page. Select it, then look for reprograming the FOB. Let me know if that helps.
Nov 20, 2010 at 6:48 PM
Advertisement
First make sure the batter is good. Then make sure it's installed correctly. Also, sometimes the circuit boards crack or the prong that connects the bat to the circuit board will come loose.
Nov 20, 2010 at 6:49 PM
I have already tried reprogramming the remote. The door locks and unlocks but nothing happens for the remote.
Nov 20, 2010 at 7:01 PM
Reprogramming the remote won't do if it's broke on the inside. That's the next step, inspect the circuit board and connectors on the inside.
Sometimes they can be repaired if you're good with a soldering gun. If not, you'll need to replace it. (Don't forget to check the bat first)
Sometimes they can be repaired if you're good with a soldering gun. If not, you'll need to replace it. (Don't forget to check the bat first)
Nov 20, 2010 at 8:06 PM