How do i remove and fit a new manual window mechanism in a ford bantam 2005 drivers side

2005 FORD BANTAM
185,000 MILES
Avatar
BENROOS
  • MEMBER
  • 1 POST
This mechanism open and close the window. This is not an automatic window
Nov 25, 2011 at 8:24 AM
Advertisement
Avatar
HMAC300
  • ✓ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
we have no info on this but you will need to disconnect the window from the regulator and the regulator will be either riveted in or bolted in. If it is riveted you migh tbe able to find a bolt/nut combo short enough so it won't hi the window when it goes down. You will have to pull the door panel off to access the regulator.
Nov 25, 2011 at 4:19 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.