I have a 2005 Dodge Ram 1500 4WD truck with a limited-slip differential. When the 4WD is engaged, and I turn at low speeds (which is when it is noticed, though may happen at higher speeds as well), observers notice that the inside rear wheel of the turn is skidding across the pavement. Is this normal behavior? I realize that a limited-slip differential will provide some torque redistribution because of the disparity of wheel turn rates, but I'm a little concerned that it's not allowing the inside tire of the turn to slow enough to not slip or skid across the pavement. This is most noticeable during non-dry pavement conditions, which allows the wheel to skid or slip more readily as opposed to dry pavement.
My questions are these:
1. Is this normal behavior?
2. What kind of bind or stress is being placed on these parts during turns like this? If the turn couldn't slip, could it break something?
Thanks
My questions are these:
1. Is this normal behavior?
2. What kind of bind or stress is being placed on these parts during turns like this? If the turn couldn't slip, could it break something?
Thanks
Dec 30, 2010 at 9:13 AM