Replaced the input and output speed sensor the tcm and checked the pcm. Now I check and no codes but still shifts hard from 1st gear to 2nd and sticks in second then wont come out of second till I park the car and kill it the when I restart it same thing shifts hard going to second gear and the sticks in second
SPONSORED LINKS
Thursday, June 20th, 2013 AT 12:27 PM
3 Replies
ASEMASTER6371
MECHANIC
52,797 POSTS
Most likely either a valve body issue or an internal failure. It is a gear ratio code. The sensors and tcm have no bearing on the code. It is an internal slippage that sets the code and puts it in limp mode
Roy
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, June 20th, 2013 AT 6:00 PM
OAVERY
MEMBER
11 POSTS
I had same issue with my 05 neon was not an internal failure, it was a broken wire to the output speed sensor. Repaired wire cleared codes, 20 mile test drive. Problem solved
Was this
answer
helpful?
Yes
No
+4
Wednesday, September 13th, 2017 AT 2:43 AM
KEN L
MASTER CERTIFIED MECHANIC
47,245 POSTS
Great addition to this thread! Please feel free to help out whenever you are on the site :)