Causes for stalling and dashboard light flicking

2005 CHRYSLER TOWN AND COUNTRY
81,500 MILES
Avatar
RICHG63
  • MEMBER
  • 2 POSTS
2005 Town and Country problem with vehicle wanting to stall and dashboard light flicking after engine heated up and seems to ONLY occur during slow speeds such as city driving and at stops. The engine light initially came on and the dealership said it was caused by the EGR value last week and replaced the EGR value. A day later same problem took back to dealership today and they said problem with alternator and after driving it home same problem again today. Any idea what else it could be?
Oct 10, 2011 at 11:51 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
JACOBANDNICKOLAS
  • CAR REPAIR CONTRIBUTOR
  • 110,190 POSTS
did they replace the alt?
Oct 11, 2011 at 1:55 AM
Advertisement
Avatar
RICHG63
  • MEMBER
  • 2 POSTS
Yes, they replaced the EGR valve last week based on the code number being thrown from the engine light. Today they replaced the alternator since they saw the problem when we pulled it in. They ran a test on the alternator and said it was only pushing a 8 instead of 14 volts and said that should fix the problem. Still having the issue of course.
Oct 11, 2011 at 2:04 AM