Advertisement

2005 Chrysler Sebring won't start

130,000 MILES • 2.4L • 4 CYL • FWD • AUTOMATIC
Avatar
BETRICIAW
  • MEMBER
  • 1 POST
It cut off while I was driving, it was low on gas, so I assumed it was out. Got to the gas station, filled up, it still would nt start. Got three error codes po340, 562 & 700. It's it possible for one code to offset the other two? Car ride gd, started immediately. I had no previous problems before this. Hasn't had the car two months, used of course. WAT cud b the prob? Pls help. ..
Apr 4, 2014 at 5:44 AM
Advertisement
Avatar
CARADIODOC
  • ✓Experienced Mechanic
  • 34,414 POSTS
P0340 - Camshaft Position Sensor Circuit Malfunction
P0562 - System Voltage Low
P0700 - Transmission Control System Malfunction

The camshaft position sensor is the most likely suspect for the stalling / no-start condition, but the wiring should be checked first. You'll get code 562 if the charging system stops working. Low system voltage will affect the other computers too and make them do weird things. With the engine running, the battery voltage must be between 13.75 and 14.75 volts. If it is low, we'll have to discuss troubleshooting the alternator. That's pretty easy on Chrysler products.

Code 700 means there's a fault code in the Transmission Computer.
Apr 4, 2014 at 10:38 AM
Advertisement
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle