How do I replace the radiator fan assembly on my 2005 Cobalt?
May 12, 2011 at 12:55 PM
cooling fan assemble r&r
PHLAP
- MEMBER
- 2 POSTS
Advertisement
Disconnect the cooling fan electrical connector. Remove the cooling fan wire from the fan shroud. Safely raise and support the vehicle. Remove the cooling fan assembly from the radiator by pushing up on the fan shroud to unsnap the retaining features.Position the cooliong fan assembly away from the radiator. Remove the air dam push-in retainers. Remove the air dam. Remove the right engine splash shield to radiator mount push-in retainer. Remove the left engine splash shield to radiator mount push-in retainer. Remove the lower raDIATOR mount, brackets, and bolts. Support the radiaTor and condensor. Tilt the radiator and condensor forward in the vehicle. Remove the cooling fan assembly from vehicle.
You are sure the radiator fan is faulty?
You are sure the radiator fan is faulty?
May 12, 2011 at 1:45 PM
Yes, I'm sure. The fan blade is missing a blade and part of the support ring attatched to it :) Thanks for the instructions.
May 12, 2011 at 3:56 PM
No problem.
May 22, 2011 at 11:39 AM
🔧 Tools & Auto Repair Parts
Find automotive tools, diagnostic equipment, and replacement
parts for your next repair.
Shop on Amazon →
Paid affiliate link. As an Amazon Associate, we earn from qualifying purchases.