When I turn the key to turn on the truck the lights come on but when I try to crank it .it only makes a click noise and nothing else.
Nov 28, 2015 at 5:59 PM
Advertisement
WRENCHTECH
✓Experienced Mechanic
20,761 POSTS
You'll have to determine if that clicking noise is coming from the starter itself. If so, it would be a bad starter.
You can also test for power arriving at the purple wire to the starter when the key is held in "start" position.
Nov 28, 2015 at 8:16 PM
DANGIL
MEMBER
4 POSTS
How would I go about that?
Nov 28, 2015 at 10:44 PM
WRENCHTECH
✓Experienced Mechanic
20,761 POSTS
It's pretty self explanatory. Use a test light at the purple wire at the starter while someone else tries to start it and see if that wire receives power.
Nov 28, 2015 at 11:35 PM
DANGIL
MEMBER
4 POSTS
Is there any guide for replacing starter on 2005 avalanche?
Dec 2, 2015 at 4:01 PM
WRENCHTECH
✓Experienced Mechanic
20,761 POSTS
What engine?
2WD or 4WD?
Have you actually tested the circuit?
Dec 2, 2015 at 5:55 PM
DANGIL
MEMBER
4 POSTS
Yes I just changed the starter myself and that was the problem thank you for all your help.
Dec 3, 2015 at 8:26 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.