2004 Toyota Sienna Bad Wheel Bearings / Torn Bushing

2004 TOYOTA SIENNA
6 CYL • FWD • AUTOMATIC
Avatar
SYNHOLLIDAY
  • MEMBER
  • 2 POSTS
What are the risks of riding with bad wheel bearings? Also, with torn bushing.
May 12, 2014 at 1:07 PM
Advertisement
Avatar
HMAC300
  • ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
no risk at all if you like to drive and have your wheels come off at speed.then try to stop it or not run into anything.
May 12, 2014 at 1:22 PM
Avatar
SYNHOLLIDAY
  • MEMBER
  • 2 POSTS
Thanks Hmac, for pointing out the risk. Now would that be due to the bad wheel bearings, or the torn bushing? Getting both taken care of is beyond what I can afford right now (I was unemployed for eight months), want to get the most urgent one done now (replace bearings, or replace lower control arm bushing).
May 13, 2014 at 6:55 PM
Avatar
HMAC300
  • ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
what happens with worn bushing is your front end alignment isn't good and your tires wear but a wheel bearing will let the wheel fall off. you decide. you will also get a crappy ride with worn bushing and hitting a pot hole with those may send your car in a different direction.
May 14, 2014 at 6:19 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.