2004 Suzuki Verona Power Window

2004 SUZUKI VERONA
90,000 MILES • 2.8L • 6 CYL • FWD • AUTOMATIC
Avatar
DOC1960
  • MEMBER
  • 3 POSTS
Drivers window will not roll dwn. checked relay ok, replaced motor and switch window still will not roll dwn.
Jan 27, 2015 at 4:11 PM
Advertisement
Avatar
CADIEMAN
  • CERTIFIED EXPERT
  • 3,544 POSTS
DO U HAVE POWERTO THE SWITCH USE A TEST LIGHT TO CK. IT
Jan 27, 2015 at 4:29 PM
Avatar
DOC1960
  • MEMBER
  • 3 POSTS
Yes I have power all the windows roll up & dwn except drivers it only rolls up
Jan 27, 2015 at 4:35 PM
Advertisement
Avatar
CADIEMAN
  • CERTIFIED EXPERT
  • 3,544 POSTS
ON WIRE ON THE MOTOR HAS POWER GOING UP AND THE OTHER HAS POWER GOING DOWN RIGHT.
Jan 27, 2015 at 4:41 PM
Avatar
DOC1960
  • MEMBER
  • 3 POSTS
Sorry for late response I have a blu/wht wire that has power for dwn the up wire is org/blk when I put my test lite on that wire the motor rotates even when the switch is not engaged
Jan 27, 2015 at 6:03 PM
Avatar
CADIEMAN
  • CERTIFIED EXPERT
  • 3,544 POSTS
OK HOW MANY WIRES ARE ON THE WINDOW MOTOR CONNECTOR? DO U SEE A GROUND OR BLACK WIRE ANYWHERE? WE CAN PICK BACK UP IN THE MORNING.
Jan 27, 2015 at 6:35 PM
Avatar
DOC1960
  • MEMBER
  • 3 POSTS
Two wires to motor one is a 16 gauge blu/wht and the other 16 guage org/wht. The wires from switch are18 guage blu/wht and the other is 18 guage org/blk these wires coming from switch go to a circuit board under dash and wires to motor come from circuit board
Jan 27, 2015 at 6:47 PM
Avatar
CADIEMAN
  • CERTIFIED EXPERT
  • 3,544 POSTS
u need to try removing the motor from the door. run a jumper wire from the motor to the door to ground it. does it run both ways. then push the window down by hand then pull it back up. then let me know what happens.
Jan 27, 2015 at 10:40 PM
Avatar
MRS.TEAS
  • MEMBER
  • 1 POST
I am currently having the same problem! Did you ever figure it out? It's driving me crazy!
Oct 20, 2016 at 1:43 PM