2004 Suzuki Swift engine swap, TPS at 86%

2004 SUZUKI SWIFT
Avatar
HOVAUTO
  • MEMBER
  • 1 POST
Electrical problem
2004 Suzuki Swift 4 cyl Front Wheel Drive Manual

Did an engine swap on an 2004 suzuki swift with 1.6 l
motor that went in was from an 05 aveo chev. 1.6
motor runs but it is flooding and fowling the plugs, we scaned computer and found that the tps is at 86% all the time, the sinal wire back to the ecm for the tps is 5 volts OUT of the computer. I check the wire right at the ecm and it is 5 volts coming out, we tried a new ecm from the car that we did a swap from but same thing 5 volts out.
Jun 25, 2009 at 7:07 AM
Advertisement
Avatar
KHLOW2008
  • ASE Certified Mechanic
  • 41,814 POSTS
  • ASE Certified Mechanic
Hi hovauto,

Thank you for the donation.

The reading and substitution of the ECM indicates the problem is with the TPS. Either it is bad or has not been inistalled correctly.

Remove the TPS and reinstall and retest. Ensure the TPS is installed correctly onto the shaft.
Jun 25, 2009 at 1:40 PM
Avatar
MADDOGMAX
  • MEMBER
  • 1 POST
hovauto did this solve your problem or was it something else ? I have the same thing happening but the TPS is good.
Aug 30, 2011 at 1:04 AM
Avatar
RIVERMIKERAT
  • ASE Certified Mechanic
  • 6,110 POSTS
  • ASE Certified Mechanic
hovauto has your issue been resolved?
maddogmax, have you readjusted your TPS?
Nov 28, 2011 at 1:26 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.