SPONSORED LINKS

2004 Suzuki Forenza MAX SPEED 15 MPH - MYSTERY

Tiny
JACOBSMEYER
  • MEMBER
  • 2004 SUZUKI FORENZA
  • 2.0L
  • 4 CYL
  • FWD
  • AUTOMATIC
  • 104,000 MILES
My car will not accelerate more then 15 mph with about roughly 2,000 RPM. Even if I floor it at take off nothing.
I've replaced Cam Shaft Sensor. (Cam Shaft Sensor A - Low input) - Still showing after 2 replacements.
Replaced Transmission Range Sensor. Still nothing.

I am stuck. I don't know where my problem could be coming from. I've already had the Timing belt replaced and looked over by three other mechanics other then me. They cant even find the problem.

SPONSORED LINKS
Saturday, August 9th, 2014 AT 8:02 PM

1 Reply

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,867 POSTS
This sounds like a wiring issue. Check to make sure the plug for the cam sensor is clean and free of corrosion. Also, check the wiring to the CAM sensor to make sure there are no open circuits or damaged wiring. Work your way back to the PCM checking the wiring. Once to the pcm, check the wire for continuity. Let me know how much resistance is there.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, August 9th, 2014 AT 8:31 PM

Please login or register to post a reply.

Related Camshaft Camshaft Sensor Content

Camshaft Angle Sensor Replacement P0015
VIDEO
Camshaft Angle Sensor Replacement P0015
Instructional repair video
Camshaft Position Sensor Symptoms
GUIDE
Camshaft Position Sensor Symptoms
An automotive engine camshaft position sensor is a simple two wire magnetic sensor that triggers a signal to the engine control module. This information is then used to help...

Sponsored links