Have a damage starter. Need to replace it.
Nov 25, 2020 at 6:19 AM
Starter location and replacement instruction's needed
2004 SUZUKI AERIO
AFLORES21
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
Good morning,
I attached the procedure for you and a picture of the starter motor.
https://www.2carpros.com/articles/how-to-replace-a-starter-motor
Roy
Dismounting
1. Disconnect negative (-) battery lead at battery.
2. Disconnect magnetic switch lead wire (1) and battery cable (2) from starting motor terminals.
3. Remove starting motor mount bolts (3).
4. Remove starting motor (4). Starting motor plate (5) should also come down.
Remounting
Reverse the dismounting procedure.
Tightening torque
Starting motor battery cable nut (a): 11 N.m (1.1 kg-m, 8.0 lb-ft)
Starting motor mount bolt (b): 23 N.m (2.3 kg-m, 17.0 lb-ft)
I attached the procedure for you and a picture of the starter motor.
https://www.2carpros.com/articles/how-to-replace-a-starter-motor
Roy
Dismounting
1. Disconnect negative (-) battery lead at battery.
2. Disconnect magnetic switch lead wire (1) and battery cable (2) from starting motor terminals.
3. Remove starting motor mount bolts (3).
4. Remove starting motor (4). Starting motor plate (5) should also come down.
Remounting
Reverse the dismounting procedure.
Tightening torque
Starting motor battery cable nut (a): 11 N.m (1.1 kg-m, 8.0 lb-ft)
Starting motor mount bolt (b): 23 N.m (2.3 kg-m, 17.0 lb-ft)
Image (Click to enlarge)
Nov 25, 2020 at 8:57 AM
Advertisement