Good morning,
I attached the procedure for you and a picture of the starter motor.
https://www.2carpros.com/articles/how-to-replace-a-starter-motor
Roy
Dismounting
1. Disconnect negative (-) battery lead at battery.
2. Disconnect magnetic switch lead wire (1) and battery cable (2) from starting motor terminals.
3. Remove starting motor mount bolts (3).
4. Remove starting motor (4). Starting motor plate (5) should also come down.
Remounting
Reverse the dismounting procedure.
Tightening torque
Starting motor battery cable nut (a): 11 N.m (1.1 kg-m, 8.0 lb-ft)
Starting motor mount bolt (b): 23 N.m (2.3 kg-m, 17.0 lb-ft)
Image (Click to make bigger)
SPONSORED LINKS
Wednesday, November 25th, 2020 AT 8:57 AM