2004 saturn le won't start

2004 SATURN SPORT COUPE
4 CYL • 2WD • AUTOMATIC
Avatar
TIMBO3345
  • MEMBER
  • 1 POST
My sister has a 2004 le that won't start. She recently took it to the dealer to replace the remote door transmitter. It has had problems since but has not been able to get it back to the dealer. I have read that there is a security feature that could be disabling the car. My brother before he was told about her taking it to the dealer decided to replace the fuel pump in the gas tank. That solved the problem for a day and would not start the next morning. Is there a way to reset something?

Tim
Dec 12, 2010 at 4:53 AM
Advertisement
Avatar
MHPAUTOS
  • ASE Certified Mechanic
  • 31,937 POSTS
  • ASE Certified Mechanic
Do you still have fuel pressure? check for spark and injector pulse, check for any unresolved fault codes with a scan, start here.

mark (mhpautos)
Dec 12, 2010 at 9:55 AM
Avatar
SATURNTECH9
  • ASE Certified Mechanic
  • 30,869 POSTS
  • ASE Certified Mechanic
So does the remote you had replace lock and unlock the car?If so it's not a remote issue.When it doesn't start does the security light flash or stay on solid?If so there is a good chance you have a bad ignition switch really common on those car's all the way up to the last year they made the ion in 2007.If the security light comes on solid or flashing when it doesn't start then you will have to take it to a shop where they can read your body control module code's if you have a code B2960 and or a B3033 then you will have to replace the ignition switch.
Dec 12, 2010 at 3:52 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.