Power Windows Problem - Help!

Avatar
MEC2005
  • MEMBER
  • 2 POSTS
My power locks went out on my L300. I replaced the blown fuse in the passenger side fuse box, and now only my driver door locks/unlocks. What could be the cause of the other three doors not working now that the fuse is replace. I am thinking a relay but want to make sure before I spend the money replacing them all.
Dec 23, 2011 at 6:05 PM
Avatar
RASMATAZ
  • ✓Experienced Mechanic
  • 75,988 POSTS
Have the body control module checked and tested
Dec 23, 2011 at 6:13 PM
Avatar
SATURNTECH9
  • ✓Experienced Mechanic
  • 30,869 POSTS
Just to add to this one when the body control module fails on those cars none of the door locks work.I have never seen in the tons of bad body control modules i have replaced only three of the four door locks inop.I have seen two or three even four bad door lock actuators though.I have replaced tons and tons of those door lock actuators there not a very good actuator at all.Do you have a multimeter or test light to do some testing?
Dec 23, 2011 at 6:50 PM
Avatar
MEC2005
  • MEMBER
  • 2 POSTS
I do not, guess my cars going into the shop :/
Dec 23, 2011 at 6:54 PM
Avatar
SATURNTECH9
  • ✓Experienced Mechanic
  • 30,869 POSTS
If you dont know how to use or have a multimeter or test light and your not good at taking things apart and fixing things thats your best bet.
Dec 23, 2011 at 7:03 PM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle