2004 Pontiac Vibe Heat

2004 PONTIAC VIBE
1.8L • 4 CYL • AWD • AUTOMATIC
Avatar
DCKY320
  • MEMBER
  • 17 POSTS
I recently got a 2004 vibe. When I got it the heat did not work. The blower worked but only blew cold air. Had it looked at and they replaced the thermostat and flushed the engine. I tried purging out the heater core thinking it might be air bound and had good flow. I have noticed that the radiator hoses are soft when first started but after about 20 minutes the get rock hard. I also noticed when I open the radiator when warm there is a white smoke and an odd smell.
Feb 8, 2015 at 11:59 AM
Advertisement
Avatar
CARADIODOC
  • ASE Certified Mechanic
  • 34,321 POSTS
  • ASE Certified Mechanic
Given the combination of symptoms, the first thing would be to have a chemical test done at the reservoir to check for a leaking cylinder head gasket. That involves drawing air from the reservoir through a glass cylinder with two chambers partially-filled with a special dark blue liquid. If combustion gases are present, the liquid will turn bright yellow.

Combustion gases that sneak into the cooling system can pool under the thermostat and prevent it from opening. Thermostats have to be hit with hot liquid to open. The gases can also cause hot coolant to stop flowing through the heater core, and that would result in your cold air.
Feb 8, 2015 at 7:01 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.