How do you change the hazard switch on a Alero.

Hello,

Here is how to change the switch out. (DIAGRAMS BELOW)

Remove the hazard warning switch bezel from the instrument panel (I/P) using a small-flat bladed tool to release the retainers. Remove the I/P center air outlet. Remove the I/P cluster. Remove the left side bolt from the hazard warning switch through the instrument panel cluster pocket. Remove the right side and center lower bolts from the hazard warning switch through the center air outlet opening. Reposition the hazard warning switch to the center air outlet opening. Disconnect the electrical connectors from the hazard warning switch. Remove the hazard warning switch from the I/P.

Tighten the bolt to 3 N.M (27 lb in). Install the right side and center lower bolts to the hazard warning switch through the center air outlet opening.

Check out the diagrams (Below)

Please let us know if you need anything else to get the problem fixed.

Cheers, Ken