Advertisement

2004 Nissan Maxima Engine

70,000 MILES • 3.5L • V6 • FWD • MANUAL
Avatar
FTABEN15
  • MEMBER
  • 2 POSTS
I change my maxima 6speed 2004 engine but the engine wont start. I got ignition, fuel and no check engine. This is a engine from a automatic maxima 2004. At this point I have change my two cam sensor for my old one because of coding, with a car dianognotic tool I got Cam ,crank signal, gaz pedal is ok and everything seem to be right but the engine just dont start. There is no check engine and after few startor reving no smoke no little trying sound from the engine. I have no more idea a this point. What can cause that ?
Jan 19, 2014 at 4:27 AM
Advertisement
Avatar
KHLOW2008
  • ✓Experienced Mechanic
  • 41,812 POSTS
Did you test the compression and are the injectors firing?
Jan 19, 2014 at 4:48 AM
Advertisement
Avatar
FTABEN15
  • MEMBER
  • 2 POSTS
I have check the compression by removing spark plug and reving starter but not with a gauge. I remove injector and it work great. It smell gaz but not ignite even the coil working.
Jan 19, 2014 at 5:01 AM
Avatar
KHLOW2008
  • ✓Experienced Mechanic
  • 41,812 POSTS
If you have ignition sparks and fuel injectors working, the only thing missing should be the compression. Try removing the spark plugs and pumping a little engine oil into the cylinders to increase the compression and retest.
Jan 21, 2014 at 3:53 AM
Advertisement
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle