2004 Nissan Frontier water pump

2004 NISSAN FRONTIER
205,000 MILES • 2.4L • 4 CYL • 2WD • AUTOMATIC
Avatar
R2PRO
  • MEMBER
  • 1 POST
I am going to try to replace the water pump & would like detailed instructions on what to do so I don't destroy my truck. Thanks, Robert
Mar 15, 2014 at 7:11 AM
Advertisement
Avatar
HMAC300
  • ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
Fig. 1: Exploded View Of Water Pump Components Including Torque Specs
Courtesy of NISSAN MOTOR CO., U.S.A.
CAUTION: When removing water pump assembly, be careful not to get coolant on drive belts.
Water pump cannot be disassembled and should be replaced as a unit.
After installing water pump, connect hose and clamp securely. Check for leaks using radiator cap tester.


Drain coolant from engine.
Refer to DRAINING ENGINE COOLANT.
Remove fan coupling with fan.
Remove power steering pump drive belt, generator drive belt, and A/C compressor drive belt.
Remove water pump pulley.
Remove water pump.
Mar 15, 2014 at 9:50 AM
Avatar
HMAC300
  • ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
rad drain pic
Mar 15, 2014 at 9:51 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.