I need to know how to change a clutch

I mean a "2004" not an o'five...

Hello,

Here is a guide that will show you how to replace the clutch and pressure plate and get it all lined up so the transmission will go back in.

https://www.2carpros.com/articles/how-to-replace-a-clutch

Please let us know if you need anything else to get the problem fixed. Thanks for the pics!

Cheers, Ken

My throwout bearing is going out. Can I just replace the bearing or do I have to get the whole clutch kit? I am doing it with a friend so labour cost doesn't matter, just the bearing by itself is a lot cheaper than the whole clutch kit. Just replaced the clutch not too long ago.

I PUT A WHOLE KIT IN MY 1946 WILLYS JEEP ("WILLY") WHEN I WAS RESTORING HIM IN 1991-1092

............LOOKS LIKE THE DARN THING WOULDA LASTED MORE THAN 20 YEARS!

REGARDLESS.....I WAS GOING IN TO REPLACE THE BEARING, ENTIRE SET UP's CONDITION WAS UNKNOWN........'CEPT I KNEW THE THROW OUT BEARING WAS BAD!

I GOT PREPARED TO DO IT ALL....HAD IT ALL ON HAND!

TURNS OUT, IT ALL LOOKED PRETTY DECENT.......MY LUCK IS, THE COMPOSITE ON THE DISC WOULDA FLEW APART IN A FEW MONTHS.......I KNOW THAT "MEYHEM FELLER" PRETTY WELL

..............SO MY MOTTO IS BETTER SAFE THAN SORRY!.......HE DESERVES THE BEST.....HECK, HE'S 67 YEARS OLD, HE WILL LAST FOREVER..........SO I DID THE WORKS!

THERE'S SOME PICS OF WHAT I DID IN THIS LINK BELOW

https://www.2carpros.com/questions/1984-ford-laser-r-r-clutch
.
.
I GOT PARTS REALLY INEXPENSIVE!

DO YOU HAVE AN ADVANCE AUTO PARTS IN YOUR REGION?

THERE IS A MANY TIMES OVERLOOKED WAY TO SAVE MONEY ON ANYTHING!

NEVER-THE-LESS........THIS MONEY SAVING METHOD MAY WORK SIMILAR WITH ANOTHER STORE

MY WHOLE CLUTCH SET COST ME .......$87...........WANT MORE INFO?????

YOUR TURN

THE MEDIC

I need to know how to change a clutch in a 2005 mitsubishi lancer es. 5 speed, front wheel drive, 2.0 l. There is no haynes manual avalible. So from beginning to end would be nice!

Refer to the diagrams for the service procedures. Additional information for installation are as follows.

REMOVAL SERVICE POINT

<< A >> RELEASE FORK REMOVAL

Move the release fork in the direction shown in illustration to remove the clip from the fulcrum.

Fig. 3: Removing Clip From Fulcrum

INSTALLATION SERVICE POINTS

>> A << RELEASE FORK INSTALLATION

1. Apply Mitsubishi genuine grease part number 0101011 or equivalent to the illustrated positions of the release fork.

2. Install the release fork to the fulcrum.

Fig. 4: Applying Mitsubishi Genuine Grease To Release Fork


>> B << CLUTCH DISC AND CLUTCH COVER INSTALLATION

1. Apply Mitsubishi genuine grease part number 0101011 or equivalent to the clutch disc splines and rub it in the splines with a brush.

2. Using the clutch disc guide to position the clutch disc on the flywheel.

3. Install the clutch cover onto the flywheel.

Fig. 5: Applying Mitsubishi Genuine Grease To Clutch Disc Splines And
Rub