2004 Mitsubishi Endeavor in cab fan

2004 MITSUBISHI ENDEAVOR

120,000 MILES • 3.6L • 6 CYL • FWD • AUTOMATIC

RAZTRUK

MEMBER
2 POSTS

Jumped in my vehicle the other day, turned the a/c on, heard the compressor kick in, went to turn the fan on, and nothing. The a/c is working, as when I drive I get cold air, but no fan. Checking my manual, there is no designated fuse for the fan. Could it be on another circuit? I assume it could only be one of three things, a fuse, the fan switch, or the fan motor. Any ideas?

Jul 21, 2015 at 3:54 AM

HMAC300

✓ASE Certified Mechanic
48,601 POSTS

there is an A/C module under the dash that controls the blower motor so if the fuses in pic are ok then you will have to get a pro to scan to see if something is wrong with that. there are no relays for the blower. see pic for fuse location.it's possible it cold be the control head where the switch is located but I'd bet either a bad blower motor or module has gone bad.

Image (Click to enlarge)

Professional Diagram for 2CarPros Members
Click here to log in and view diagram.

Jul 21, 2015 at 6:02 AM

RAZTRUK

MEMBER
2 POSTS

Well I guess I already knew that there was something else that was wrong that a simple fuse change would not fix the problem. It seems every time I use one of these "ask the expert" sites, I get, see a pro. Never had any of them actually "help".

Jul 22, 2015 at 4:00 AM

HMAC300

✓ASE Certified Mechanic
48,601 POSTS

we can only do so much and cannot read car codes via computer

Jul 22, 2015 at 11:44 AM

Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.