Replacing a thermostat

2004 MAZDA 3
114,000 MILES • 2WD • AUTOMATIC
Avatar
TOMSEEF
  • MEMBER
  • 2 POSTS
how easy is it to change out a thermostat on a 2004 mazda 3 2.0, and where can i find a schematic. will i need any special tool. what are the dangers of doing it myself, and how long should it take. my experiance is that i do 90% of all auto maintenance
Dec 16, 2010 at 11:26 PM
Advertisement
Avatar
RASMATAZ
  • CERTIFIED EXPERT
  • 75,992 POSTS
THERMOSTAT REMOVAL/INSTALLATION

Warning: Remove and install all parts when the engine is cold, otherwise they can cause severe burns or serious injury.
Remove the battery cover.
Disconnect the negative battery cable.
Remove the under cover and splash shield as a single unit.
Drain the engine coolant.
Position the coolant reserve tank out of the way.
Remove the plug hole plate.
Position the drive belt out of the way.
Remove the drive belt tensioner.
Remove in the order indicated in the table.
Install in the reverse order of removal.
Add engine coolant.
Inspect for the engine coolant leakage.



Image (Click to enlarge)
Attached Media
Dec 16, 2010 at 11:49 PM
Avatar
TOMSEEF
  • MEMBER
  • 2 POSTS
thank you. how long should it take the average person or mechanic
Dec 17, 2010 at 12:01 AM
Advertisement
Avatar
RASMATAZ
  • CERTIFIED EXPERT
  • 75,992 POSTS
labor time: R/R 1.5hr
Dec 17, 2010 at 5:30 AM