SPONSORED LINKS

2004 Lexus ES 330 replaced front axles

Tiny
STEVELSKI
  • MEMBER
  • 2004 LEXUS ES 330
  • 250,000 MILES
After replacing the complete axles from transmission to wheel hub, the ABS module has a code: Right and left wheel speed sensor not working. Axles
have ABS ring installed by manufacturer. Could NOT reset code using an aftermarket engine analyzer.

Any Ideas<
steve
SPONSORED LINKS
Monday, August 12th, 2013 AT 9:58 AM

2 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Check the resistance in sensors or it cold be a wire going to them. Also check for a piece of rust on both sensors as they are magnetic and can pick up rust so that would effect them as well. You need a pro style scanner to erase codes or to further check it. Not the ones they sell at auto parts
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, August 12th, 2013 AT 12:20 PM
Tiny
STEVELSKI
  • MEMBER
  • 2 POSTS
Thanks. I believe the problem is in the code reset. I'll take it to a pro-style mechanic tomorrow to erase codes and start over.
Was this
answer
helpful?
Yes
No
Monday, August 12th, 2013 AT 12:33 PM

Please login or register to post a reply.

Sponsored links