SPONSORED LINKS

I replaced fuel pump and fuel filter and it still is not cranking

Tiny
JBDAVIS
  • MEMBER
  • 2004 JEEP CHEROKEE
  • 65,000 MILES
My car stopped running, I was told that it was my fuel pump was bad, so I replaced the fuel pump, and fuel filter, and it still won't crank? The model and make is a 2004 jeep grand cherokee larado v6.
Saturday, February 25th, 2012 AT 12:12 AM

2 Replies

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
-Are you getting an ignition spark? If so check engine compression
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, February 25th, 2012 AT 12:14 AM
Tiny
CARADIODOC
  • MECHANIC
  • 33,871 POSTS
What's the symptom? Cranking and the fuel pump have nothing in common. Chrysler fuel pumps never quit once they're running. When they fail, they fail to start up. If the engine stalled while you were driving, you could very well have a turned-off fuel pump but you have to check for spark too. Don't stop diagnosing with the first thing you find dead.

If the starting system also is not working, you might have a charging system problem. Did you notice a "Check Gauges" light or the voltmeter was going low?
Was this
answer
helpful?
Yes
No
Saturday, February 25th, 2012 AT 12:23 AM

Please login or register to post a reply.

Related Fuel System Fuel Pump Replace/Remove Content

Fuel Pump Replacement
GUIDE
Fuel Pump Replacement
When a fuel pump goes out it can do so one of two ways either it can quit and stop working or it can fail intermittently causing the engine to stall or not start.
VIEW MORE

Sponsored links