How would I replace my serpentine belt in my Jaguar?
Dec 19, 2012 at 10:58 PM
Jaguar XJ8 Belt Problem
2004 JAGUAR XJ8
ANONYMOUS
- MEMBER
- 1 POST
Advertisement
ASEMASTER6371
- ✓ASE Certified Mechanic
- 52,796 POSTS
Accessory Drive Belt - 3.5L/4.2L (12.10.40)
Removal
All vehicles
Disconnect the battery ground cable.
Remove the air cleaner outlet pipe.
Vehicles with supercharger
Remove the supercharger belt.
All vehicles
Detach the accessory drive belt.
1) Rotate the accessory drive belt tensioner counter-clockwise.
Use a 3/8 inch square drive bar to rotate the accessory drive belt tensioner.
2) Detach the accessory drive belt.
Remove the accessory drive belt.
1) Remove the accessory drive belt tensioner retaining bolt.
2) Remove the accessory drive belt tensioner.
3) Remove the accessory drive belt.
Installation
To install, reverse the removal procedure.
Tighten to 40 Nm .
Removal
All vehicles
Disconnect the battery ground cable.
Remove the air cleaner outlet pipe.
Vehicles with supercharger
Remove the supercharger belt.
All vehicles
Detach the accessory drive belt.
1) Rotate the accessory drive belt tensioner counter-clockwise.
Use a 3/8 inch square drive bar to rotate the accessory drive belt tensioner.
2) Detach the accessory drive belt.
Remove the accessory drive belt.
1) Remove the accessory drive belt tensioner retaining bolt.
2) Remove the accessory drive belt tensioner.
3) Remove the accessory drive belt.
Installation
To install, reverse the removal procedure.
Tighten to 40 Nm .
Dec 19, 2012 at 11:52 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.