Firing Order

2004 ISUZU RODEO
127,000 MILES • 6 CYL • 2WD • AUTOMATIC
Avatar
JULIJEPSEN
  • MEMBER
  • 1 POST
2004 isuzu rodeo 3.5L - What's the ignition coil sequence? I know that coil #4 is bad, but don't know the sequence/ which coil is #4 ?
Feb 6, 2011 at 5:22 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
KHLOW2008
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 41,814 POSTS
Here is the engine spark plug firing order. Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.
Cheers
Image (Click to enlarge)
Attached Media
Feb 8, 2011 at 4:47 PM
Advertisement
Avatar
TROYD07
  • MEMBER
  • 1 POST
doin a timing belt on my 04 rodeo and i need to line the cams back up- repair manual says to make sure it is on the number two cylinder but i cannot find the firing order anywhere--little help please??
Oct 3, 2018 at 6:39 PM (Merged)
Avatar
MHPAUTOS
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 31,937 POSTS
Hi there, timing belt set up as per pics. mark (mhpautos)


https://images.2carpros.com/forum/automotive_pictures/61395_Graphic_1_2.jpg


https://images.2carpros.com/forum/automotive_pictures/61395_Graphic2_1.jpg

Oct 3, 2018 at 6:39 PM (Merged)
Avatar
SMOKEYWILD
  • MEMBER
  • 2 POSTS
Hello
Could you please help with the firing order for my rodeo if you have a diagram would be much appreciated
Regards matthew
Oct 3, 2018 at 6:39 PM (Merged)
Avatar
WRENCHTECH
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 20,761 POSTS
We don't show a Rodeo made in 2005 here in the US.
Oct 3, 2018 at 6:39 PM (Merged)
Avatar
SMOKEYWILD
  • MEMBER
  • 2 POSTS
Im in Australia brisbane its a rodeo 2005 petrol 4 cylinder 2.4 L thank you
Oct 3, 2018 at 6:39 PM (Merged)
Avatar
DELVENUA
  • MEMBER
  • 1 POST
Can u please show me a diagram of the firing order for my engine and the timing marks my water pump recently stopped working while i was driving causing my timing belt to slip off
So now my hubby is needing help with the firing order and the timng points to my 2002 isuzi rodeo
Oct 3, 2018 at 6:39 PM (Merged)
Avatar
WRENCHTECH
  • AUTOMOTIVE REPAIR CONTRIBUTOR
  • 20,761 POSTS
If that belt slipped off while the engine was running, then you could be in deep trouble. This is an interference engine and it will bend the valves almost instantly. http://i1198.photobucket.com/albums/aa448/Wrenchtech/89110885.gif http://i1198.photobucket.com/albums/aa448/Wrenchtech/89110887.gif
Oct 3, 2018 at 6:39 PM (Merged)