Just replaced alternator and battery had been fully charged and all checks showed everything was ok
Dec 5, 2011 at 4:09 AM
Why won't the battery hold a charge when the alternator had been replaced?
2004 HYUNDAI ACCENT
FARMER2012
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
with the motor running, the voltage at the battery should be 13.7 to 14.5 volts.
if it is and your battery is good after a load test, you most likely have a draw on the system that needs to be checked from a shop.
Roy
if it is and your battery is good after a load test, you most likely have a draw on the system that needs to be checked from a shop.
Roy
Dec 5, 2011 at 4:21 AM
Advertisement