Looking to locate drivers side blend door actuator in order to try and replace myself?

Tiny
SMARC824
  • MEMBER
  • 2004 GMC YUKON
  • 6.0L
  • V8
  • AWD
  • AUTOMATIC
  • 162,000 MILES
2004 Yukon Denali. Drivers side and defrosters blow cold while passenger side is hot. Went to dealership and they are claiming truck has 3 actuators and ALL need replacing to the tune of $1600.00. Looking to locate drivers side actuator in order to try and replace myself. I thought it was under drivers side dash. If it is located on passenger side as in you Chevrolet video I'll just try swapping that one for a new one. Any help would be appreciated.

Thanks
Saturday, November 15th, 2014 AT 7:40 AM

2 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
With key on pull hvac fuse inside car and then reinstall it may reset it to where it works. if not iit is on the bottom side of heater box towards passenger side. Please look at this guide and the images below.

https://www.2carpros.com/articles/replace-blend-door-motor

Check out the diagrams (Below). Please let us know if you need anything else to get the problem fixed.
Was this
answer
helpful?
Yes
No
+10
Saturday, November 15th, 2014 AT 8:18 AM
Tiny
SQM
  • MECHANIC
  • 6,383 POSTS
Hello,

The driver side blend door actuator is located behind the center console.

https://www.2carpros.com/articles/replace-blend-door-motor

Keep in mind that after replacement the new actuator will need re-learning procedure in order for this to work properly.

I have attached the replacement and the re-learning procedure below.

Please let me know of any questions.
Thank you.
Was this
answer
helpful?
Yes
No
-1
Sunday, January 9th, 2022 AT 1:24 PM

Please login or register to post a reply.

Sponsored links