I had a code PO410. Where is the location of the secondary air injection pump on my 2004 GMC Envoy with the 4.2L inline 6?
Thank You
Thank You
Feb 11, 2011 at 10:11 PM
Code PO410
2004 GMC ENVOY
JERRY STOLTZ
- MEMBER
- 1 POST
- FOLLOW
Repair Safety Notice:
This information is for general instructional purposes only. Vehicle repair can be dangerous.
Verify all information, follow manufacturer service procedures, use proper tools and safety equipment,
and consult a qualified repair shop when needed.
Advertisement
SECONDARY AIR INJECTION (AIR) PUMP REPLACEMENT
REMOVAL PROCEDURE
Raise the vehicle. Refer to Vehicle Lifting.
Disconnect both the air inlet and air outlet pipes from the secondary air injection (AIR) reaction pump.
Remove the electrical relay from the AIR pump bracket.
Disconnect the electrical connector from the AIR pump.
Remove the 3 bolts securing the AIR pump bracket to the vehicle frame.
Remove the AIR pump from the vehicle.
REMOVAL PROCEDURE
Raise the vehicle. Refer to Vehicle Lifting.
Disconnect both the air inlet and air outlet pipes from the secondary air injection (AIR) reaction pump.
Remove the electrical relay from the AIR pump bracket.
Disconnect the electrical connector from the AIR pump.
Remove the 3 bolts securing the AIR pump bracket to the vehicle frame.
Remove the AIR pump from the vehicle.
Image (Click to enlarge)
Feb 11, 2011 at 10:18 PM
Advertisement
Under vehicle on frame see diagram
Image (Click to enlarge)
Feb 11, 2011 at 10:25 PM