2004 FORD CROWN VICTORIA
81,444 MILES
Avatar
GEORGE CORBETT
  • MEMBER
  • 5 POSTS
So I disconnected the battery and still the same problem. The Lcm was faulty and it wasn't plugged up all the way, I had no lights tail or front while driving. Only the harness for the lights was unplugged. Now still my key doesn't work. Still manually starting car.
Mar 9, 2013 at 9:28 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
ASEMASTER6371
  • CAR REPAIR CONTRIBUTOR
  • 52,796 POSTS
ok, lets try this again.

you will need a scan tool to look at the security setting in the light control module. if it is clear or closed, it will have to be re set by ford. they are the only ones who can set it.

what happen to the old lcm???

Roy
Mar 9, 2013 at 10:45 PM
Advertisement
Avatar
GEORGE CORBETT
  • MEMBER
  • 5 POSTS
Still got it but it doesn't turn my lights on.
Mar 9, 2013 at 10:56 PM
Avatar
ASEMASTER6371
  • CAR REPAIR CONTRIBUTOR
  • 52,796 POSTS
does it start the car??? trying to verify it is a security issue

Roy
Mar 9, 2013 at 10:58 PM