Intake air temperature sensor?

Tiny
RAMER123
  • MEMBER
  • 2004 DODGE RAM
  • 4.7L
  • V8
  • 2WD
  • AUTOMATIC
Hi, I already have a air intake sensor for my airbox. But there's not one for the in the picture.
Tuesday, October 20th, 2015 AT 1:29 PM

12 Replies

Tiny
CARADIODOC
  • MECHANIC
  • 33,873 POSTS
What is the question or what problem are you having?
Was this
answer
helpful?
Yes
No
Tuesday, October 20th, 2015 AT 5:00 PM
Tiny
RAMER123
  • MEMBER
  • 11 POSTS
Im missing the connector, as shown on picture 1.
Was this
answer
helpful?
Yes
No
+1
Tuesday, October 20th, 2015 AT 5:50 PM
Tiny
CARADIODOC
  • MECHANIC
  • 33,873 POSTS
Is this the original engine? I have an '89 engine in my '88 Grand Caravan, and the '89 is missing the threaded hole for the intake air temperature sensor. The '89 vehicle would be missing that plug.
Was this
answer
helpful?
Yes
No
Tuesday, October 20th, 2015 AT 6:01 PM
Tiny
RAMER123
  • MEMBER
  • 11 POSTS
2004 dodge ram 4.7L V8
Was this
answer
helpful?
Yes
No
+1
Tuesday, October 20th, 2015 AT 6:03 PM
Tiny
CARADIODOC
  • MECHANIC
  • 33,873 POSTS
What's the recent history that involved disconnecting the sensor?
Was this
answer
helpful?
Yes
No
+1
Tuesday, October 20th, 2015 AT 6:21 PM
Tiny
RAMER123
  • MEMBER
  • 11 POSTS
Bought a used truck, run fine, and I never unplug that connector. Also only time I work around that plug is when I change my ignition coil. I try to search for it, its no where to be found.
Was this
answer
helpful?
Yes
No
+1
Tuesday, October 20th, 2015 AT 6:30 PM
Tiny
CARADIODOC
  • MECHANIC
  • 33,873 POSTS
Well, I found it on the wiring diagram. The wire colors are dark blue / dark green and dark blue / light green. The first one is the sensor ground and is common to a lot of sensors. The second one goes to pin 30 of the Engine Computer. That plug has to be there somewhere unless it was cut off. Sometimes plugs fit on more than one thing, so check if those wire colors are connected to something else nearby.
Was this
answer
helpful?
Yes
No
Tuesday, October 20th, 2015 AT 7:36 PM
Tiny
MATT.17
  • MEMBER
  • 3 POSTS
I just recently bought a 2003 dodge ram with the 4.7 liter 4.8 my truck is throwing the code for intake temperature sensor I found the sensor but I can’t find a connect for it where can I find the wires to rewire it
Was this
answer
helpful?
Yes
No
+1
Saturday, August 12th, 2023 AT 12:11 AM
Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 47,643 POSTS
The wiring connector should be there sticking out of the main engine wiring loom, here are the color of the wires going to the intake air temperature sensor.
Was this
answer
helpful?
Yes
No
Saturday, August 12th, 2023 AT 10:13 AM
Tiny
MATT.17
  • MEMBER
  • 3 POSTS
The main engine wiring loom where the connectors for the TPS sensor is?
Was this
answer
helpful?
Yes
No
Saturday, August 12th, 2023 AT 11:47 AM
Tiny
MATT.17
  • MEMBER
  • 3 POSTS
  • 2003 DODGE RAM
  • 4.7L
  • V8
  • 4WD
  • AUTOMATIC
  • 137,000 MILES
I just recently bought the truck listed above 1500. I noticed the sensor air intake manifold sensor is plugged into the manifold, but there is no connector to be found. Where would I find the wires to reconnect it or a connector?
Was this
answer
helpful?
Yes
No
+1
Saturday, August 12th, 2023 AT 3:20 PM (Merged)
Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 47,643 POSTS
The wiring connector should be there sticking out of the main engine wiring loom.
Was this
answer
helpful?
Yes
No
Saturday, August 12th, 2023 AT 3:20 PM

Please login or register to post a reply.

Sponsored links