2004 Dodge Intrepid P0652 Error Code

109,000 MILES • 6 CYL • FWD • AUTOMATIC
Avatar
DJANDYBASS
  • MEMBER
  • 2 POSTS
I have a 2004 Dodge Intrepid SE V6/ I Just recently replaced the timing chain as it was loose. Trying to start the car, I have to give it a bit of gas to get it going. Then when driving if I push the gas to the floor it sputters and wont switch gears. If I accelerate slowly its perfect. The check engine light is on giving error code P0562 which is supposedly low voltage/battery, but could this cause my issue? Not sure what the problem is but any advice would be great.
May 28, 2011 at 8:21 PM
Avatar
CARADIODOC
  • ✓Experienced Mechanic
  • 34,403 POSTS
Use an inexpensive digital voltmeter to measure battery voltage while the engine is running. It must be between 13.75 and 14.75 volts. If it is low, measure the voltage on the two small wires on the back of the alternator while the engine is running.
May 28, 2011 at 8:54 PM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle