Advertisement

2004 Chrysler PT Cruiser Stalling, won't start, throws codes

50,000 MILES • 2.4L • 4 CYL • TURBO • FWD • AUTOMATIC
Avatar
GMERRALL
  • MEMBER
  • 1 POST
I have a 2004 PT Cruiser Turbo. A person sent you a problem that I am having as well.

Car runs but will stall without warning, engine light comes on, P0032, P0038, P0132 and P0170
Sometimes it will restart but sometimes not. No rhyme or reason for this. I have replaced plugs, wires, almost all sensors and still not fix. Replaced PCM, still no fix. I read your response on the power steering sensor wicking oil up to the PCM. Checked that and found that I definitely had that problem. Unplugged the sensor for now, cleaned the PCM connectors and left the sensor unplugged for now. Cut wires near the PCM and capped them while I wait for the new sensor. Drove car today and had the same stalling issues and codes coming on. I am in this for a few thousand dollars and still no fix. I would never have guessed the steering sensor but I see that is a problem. All things being said, I am still finding that the car stalls for no reason and flips the above codes. Been to the dealer three times and they tell me they can't figure this out.
Any suggestions would be greatly appreciated.
Aug 4, 2015 at 1:35 PM
Advertisement
Avatar
HMAC300
  • ✓Experienced Mechanic
  • 48,601 POSTS
why in the hell would you cut wires? now it h as to be repaired correctly and not with crimp connectors? all those codes ar O2 sensor problems front and back of converter. see pic
Dec 20, 2016 at 9:52 AM
Advertisement
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle