SPONSORED LINKS

Start and no start

Tiny
BIG WOO
  • MEMBER
  • 2004 CHRYSLER CONCORDE
  • 3.5L
  • 6 CYL
  • FWD
  • AUTOMATIC
  • 130,000 MILES
I have changed camshaft sensor, crankshaft sensor and I have started it 5 or 6 times in a row then time comes it starts fine when I take it back to the customer and then it goes back to turning over but will not start any ideas
Monday, March 17th, 2014 AT 7:44 PM

1 Reply

Tiny
KASEKENNY
  • MECHANIC
  • 18,907 POSTS
Sounds like we have a connection issue if the engine will start fine and then it will stop.

So, let's start with this guide to see what we have and do not have when it is not starting:

https://www.2carpros.com/articles/car-not-running-advanced

Most likely this is going to be a spark or fuel issue as it would not lose compression intermittently.

So here are two guides that will get us further down that road:

https://www.2carpros.com/articles/how-to-check-fuel-system-pressure-and-regulator

https://www.2carpros.com/articles/how-to-test-an-ignition-system

Once we know if we are losing spark or fuel then we will be able to better determine what the issue is.

Please let us know what you find, and we can go from there.

Thanks
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, March 20th, 2022 AT 7:26 AM

Please login or register to post a reply.

Related Engine Not Running Content

How to fix an engine that wont start
VIDEO
How to fix an engine that wont start
Instructional repair video
Engine Not Starting
GUIDE
Engine Not Starting
Over the past 20 years at 2CarPros we have identified the top problems that are easily fixed. This guide can save you a trip to the repair garage or calling a tow truck and...
VIEW MORE

Sponsored links